Easy Pro Pond Products

EasyPro gear is usually bought to solve a specific water problem: stagnant water, low oxygen, cloudy conditions, algae, muck buildup or ice damage around a dock or boat lift. Each product line does one job, so matching the system to the problem is the biggest step.

It is most useful on:

• ponds with fish or koi
• waterfalls, streams and pondless features
• ponds that lose oxygen in hot weather
• docks and shorelines that freeze in winter
• larger ponds and lakes with limited circulation

Equipment alone will not fix every water quality problem, but the right system helps circulation and oxygen levels and can support healthier conditions.

Pond kits and pondless waterfall kits

Choose an EasyPro pond kit (Mini, Small, Medium, Large or the Eco-Series DIY kit) when you want open water, fish and plants, with a skimmer and filter you can service at the pond edge.

Choose a Just-A-Falls pondless waterfall kit when you want the sight and sound of falling water without an open pond to look after. Kits run from Mini to Extra Large, with layouts sized for short to long streams.

Aerators and de-icers

Choose a shallow water aerator (PA6SWN or PA8SWN) when the pond is 7 feet deep or less and you want oxygen and movement in shallow water.

Choose a PA series or high pressure rocking piston aerator for deeper water and larger ponds. Deep-water PA series kits cover roughly one to six acres and depths to about 50 feet, and the high pressure 2 hp systems handle deeper water and longer airline runs using smaller line sizes. Compare the full pond aerators range for models outside the EasyPro line.

Choose a dock de-icer when the priority is keeping water open around docks, piers and boat lifts through winter. These are diffused-air systems that work in shallow and deep water.

Pumps

• TM Series submersible pumps are built for high volume on large waterfalls, wide streams and pondless features.
• TH Series submersible pumps handle ponds, waterfalls and fountains in 115v or 230v models, built for continuous operation.
• TB Series submersible pumps are for high head work: tall waterfalls, long stream runs and demanding features.
• VSP165 is a variable speed external pump with digital controls, for when you want adjustable flow and lower running costs.

Filtration and spillways

Choose a pressurized bead filter when you want mechanical and biological filtration for koi ponds, hybrid ponds and fish-heavy systems. Models cover 1,800 to 10,000 gallons, with optional blower upgrades.

Choose the Skid Mount system when you want one pre-assembled, pre-plumbed unit with mechanical and biological filtration, UV clarifier, external pump and a valved bypass.

Choose Vianti Falls spillway kits when you want a smooth sheet of water over a wall, patio edge or entryway, indoors or outside.

Start with the job the equipment has to do, then match the model to the pond.

• Project type and water volume. A small garden pond, a pondless stream and a multi-acre lake need very different equipment. Filtration in this lineup is rated up to 10,000 gallons, while aeration scales to multi-acre ponds.
• Depth. Shallow and deep ponds can need different aeration systems even when they cover the same surface area. Check average and maximum depth where possible.
• Head height and run length for pumps. Wide, low falls want volume. Tall falls and long plumbing runs want a high-head pump.
• Fish load. More fish means more filtration, which is where the pressurized bead filters and skid mount systems earn their place.
• Liner conditions. Most backyard ponds and water gardens take 45 mil DuraLiner EPDM, sold in boxed sizes and rolls. Sites with sharp rock, heavy boulder work or commercial traffic are better suited to the 60 mil DuraLiner.