6″ & 12″ EPDM Flashing Tape for Pond Liners
Pipes, drains, skimmers and waterfalls are where liners leak. Anjon EPDM flashing tape is uncured EPDM rubber that stretches and conforms to the shape under it, so you can seal around fittings and corners, cap a seam or patch a hole with the same material as the liner.
• Stretches to Fit: uncured EPDM conforms around pipes, fittings and uneven surfaces.
• Two Widths: 6″ in 25′, 50′ and 100′ rolls, or 12″ in a 50′ roll for wide patches and big fittings.
• Cap Your Seams: lay it over a seam made with 3″ seam tape. The Professional Seam Kits pair the two.
• Made for EPDM: for 45 mil and 60 mil EPDM rubber pond liner.
• Primer Required: prime every surface the tape will cover with Anjon EPDM primer (sold separately).
Anjon EPDM Flashing Tape Specifications
| Size | Width | Length | SKU |
| 6″ × 25′ | 6″ | 25′ | 302682.25 |
| 6″ × 50′ | 6″ | 50′ | 302682.5 |
| 6″ × 100′ | 6″ | 100′ | 302682 |
| 12″ × 50′ | 12″ | 50′ | 309773 |
Brand: Anjon. Material: uncured EPDM rubber. Use with: 45 mil and 60 mil EPDM pond liner. Primer: required, sold separately.
Where to Use EPDM Flashing Tape in a Pond
- Around pipe penetrations, bottom drains and bulkhead fittings
- Around skimmer openings and waterfall spillways
- Over a finished seam, for a second layer on top
- As a patch over a puncture or tear (cut it to size)
How to Apply EPDM Flashing Tape
- Clean every surface the tape will cover and let it dry completely.
- Brush Anjon EPDM primer onto every surface the tape will cover, then wait 15 to 30 minutes until it is slightly tacky.
- Stretch the tape over the area and press it down firmly, working it around corners and fittings.
- Roll the whole surface with a seam roller to push out air pockets.
- Seal the exposed edges with black lap caulk.
- Let it cure for 24 hours before filling the pond.
Anjon Flashing Tape FAQs
6″ or 12″?
Use 6″ for capping seams and most fittings. Choose 12″ for wide patches and larger penetrations.
Is primer included?
No. Order Anjon EPDM primer with the tape.
Can I use it to join two sheets of liner?
Join the sheets with double-sided seam tape first, then cap the seam with flashing tape.
How long before I can fill the pond?
Let it cure for 24 hours.
Before You Order Anjon Flashing Tape
- Measure the length to cover: seams, the distance around each fitting, and any patches.
- You also need EPDM primer and a seam roller.
- For EPDM rubber liner only.
- Only patching one hole? The Anjon Repair Kits come with pre-cut patches.
- FREE Shipping via FEDEX, LTL Ground, & UPS. Ships in 2-3 Business Days.
- Ships Only to Lower 48 States of the United States
Recommended for you
Anjon 6" & 12" EPDM Flashing Tape Reviews
