Scott Aerator Amherst Pond Fountain Scott Aerator Amherst Pond Fountain
Scott Aerator Amherst Pond Fountain from $2,699.00
Transform Your Pond or Lake into a Mesmerizing Beauty with the Scott Aerator Amherst Pond Fountain Pump Size Spray Size Flow Rate 3/4 HP 10' High x 25' Diameter 65 gpm 1 HP 10' High x 30' Diameter 75 gpm 1.5 HP 12' High x 35' Diameter 115 gpm 3 HP 20' High x 40' Diameter 170 gpm Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Amherst nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Easy installation, requires no maintenance.  Available in 3/4 HP, 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks. View our entire pond fountain collection.  Scott's Aerator Amherst Fountain is a stylish and functional decorative fountain that stands out in any backyard setting. The Amherst Fountain is designed to offer a variety of settings including a channel or pool, pool or pond wall, or garden wall. The water features can hold up to 400 gallons of water so the fountain offers a larger capacity than most standard fountains.  The Fountain features an adjustable spray width that can be adjusted to 3 different sizing options. The fountain can be connected to an electrical cable that is approximately 70 feet long to provide power for the electric motor. This is an excellent feature for placement near an outlet and some electric fountains come with the cable included.  Easy to use and easy for the consumer! The Amherst is an entirely new concept in walk-behind automatic water feature products. It offers great water flow and quality with no electricity required! It is built using only the highest quality materials and performance, so you can be assured that this unit will last a lifetime. The Scott Aerator Amherst Fountain has an adjustment system that adjusts the width of your spray pattern, giving you the option to adjust both up and down to your desired width. Features: Both freshwater and saltwater can be used with the Scott Aerator Fountain. 70 feet of 12-gauge, submersible cable are included with this unit.  There are also longer cord lengths available. There are also lights available.
Scott Aerator Clover Pond Fountain Scott Aerator Clover Pond Fountain
Scott Aerator Clover Pond Fountain from $1,889.00
Pump Size Spray Size Flow Rate 1/3 HP 300 gpm 1/3 - 3/4 Acre 1/2 HP 400 gpm 3/4 -1 Acre 1 HP 500 gpm 1 - 1.5 Acre Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Clover nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1/2 HP, 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks. LED Lights (Optional)  Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP.   Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included   Timers (Optional)  Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.   115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D The Clover fountain produces a stunning waterfall that sounds as lovely as it does. The Clover's brass center nozzle is ringed by individual side nozzles, which together produce a stunningly angled spray pattern. The mainstream of the Clover will soar to a height of 40 feet, while the side nozzles will shoot out an astounding 20 feet! The Clover not only makes your pond more attractive, but it also creates a healthy aquatic habitat by transferring oxygen at high rates and circulating a lot of water. The Clover is the most environmentally responsible type of fountain on the market since it uses an oil-free, stainless steel submersible motor, much like all of the items Scott Aerator offers. Oil-free, 230-volt motor. 90 gallons per second of water. 40 feet high is the center stream. The 20-foot-long angled spray pattern of side jets. It comes with a 100-foot 12-gauge submersible power cord. Longer lengths of electrical cords can be obtained. Later, light kits can be added. suitable for usage in seawater. Required for anchoring are two 20-pound weights or concrete blocks (not Included). Anchoring requires two nylon ropes (not included). Features: Electric cable provided is 100 feet long, 12-gauge submersible. Electric cable can be ordered in greater lengths. Optional Light kits can be purchased separately. Approved for use in salt water.
Scott Aerator Cambridge Pond Fountain Scott Aerator Cambridge Pond Fountain
Scott Aerator Cambridge Pond Fountain from $2,639.00
Pump Size Spray Size Flow Rate 1 HP 20' H x 25' W 75 gpm 1.5 HP 25' H x 30' W 115 gpm 3 HP 30' H x 35' W 175 gpm Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Cambridge nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks. The Cambridge fountain will provide a spectacular focal point to your outdoor paradise while simultaneously vastly improving the health of your pond. Three individually distinct brass nozzles are included with this water feature, and all can be easily changed in minutes, and no tools required! The Cambridge  will provide a dynamic, aesthetically pleasing addition to your pond or lakescape while helping to maintain water clarity, oxygen levels, and overall promoting a healthy aquatic environment. The Cambridge is manufactured utilizing a stainless steel, oil-free, submersible motor and pump, making it the most environmentally friendly fountain on the market. The Scott Aerator Company has engineered all of its water features to eliminate the need for costly, time-consuming winterizing products and procedures. Simply leave your fountain in the water, turn off its power supply, and forget about it all winter. Once the water thaws in the spring, re-establish power to the unit and you’re good to go. All components will withstand sub-zero conditions without damage. The Cambridge is proudly manufactured in the USA and carries an unconditional 5-year motor warranty.
Scott Aerator Great Lakes Pond Fountain Scott Aerator Great Lakes Pond Fountain
Scott Aerator Great Lakes Pond Fountain from $2,589.00
3/4 HP Spray Sizes Gusher 30' H x 6' W Rosewood 25' H x 35' W Baystone 10' H x 25' W Millbrook 12' H x 25' W Tudor 10' H x 35' W 1 HP Spray Sizes Gusher 35' H x 6' W Rosewood 30' H x 40' W Baystone 14' H x 30' W Millbrook 15' H x 30' W Tudor 12' H x 40' W   Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 3/4 HP and 1 HP. Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks. LED Lights (Optional) Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP. Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included Timers (Optional) Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function. 115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D Five Fountains in One! The Great Lakes Fountain, the newest product from Scott Aerator Company, offers a stunning, adaptable water feature that enhances the health of your pond. This fountain comes with five different brass nozzles that are all easily interchangeable without the use of any tools. Any of the five alternatives will add dynamism and aesthetic appeal to your pond or lake's landscape while supporting a healthy aquatic ecology and maintaining water clarity and oxygen levels. The Great Lakes Fountain is the most environmentally friendly fountain available since it is made with a stainless steel, oil-free, submersible motor and pump. All of the water features created by the Scott Aerator Company were engineered to do without the pricey and time-consuming winterization process. Simply leave your fountain running, switch off the electricity, and ignore it all winter. Restore power to the device once the water thaws in the spring, and you're ready to go. All parts can resist temperatures below zero without suffering damage. Features: A gorgeous, layered style coming from the "Baystone" nozzle. From the "Rosewood" nozzle, a stunning, cascading style From the "Tudor" nozzle, a broader, cascading style An attractive, conical form with the "Millbrook" nozzle. An upgraded version of the "Gusher" nozzle's classic geyser design.
Kasco VFX Series Pond Aerating Fountain Kasco VFX Series Pond Aerating Fountain
Kasco VFX Series Pond Aerating Fountain from $1,662.00
Features:  Available as 1/2, 3/4, 1, 2, and 5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Operates in as little as 15 in. of water Complete packages are ETL approved to UL and CSA standards 2-year warranty on 1/2, 3/4, and 1HP units 3-year warranty on 2 and 5HP units (optional 5 year extended warranty available)    Motor Size Pond Size Aerated Spray Pattern 1/2 HP 3/4 Acre 5’ H x 15’ W 3/4 HP 1 Acre 6’ H x 21’ W 1 HP 1.25 Acre 8’ H x 26’ W 2 HP 2 Acres 8’ H x 32’ W 5 HP 3 Acres 9' H x 34' W Package Includes:    Motor unit Float Bottom screen Control panel with GFCI protection Power cord Mooring lines   Majestic Beauty Meets Practical Functionality Adorn your backyard with the Kasco VFX Series Pond Aerating Fountain, the epitome of beauty meeting functionality. This aesthetically stunning water feature also doubles as a potent aerator, ensuring your pond remains healthy and vibrant. Let the rhythmic sound of water gently splashing soothe your senses as you sit back and marvel at the mesmerizing water patterns. This versatile fountain can become the centerpiece of any outdoor space, seamlessly blending in while enhancing the overall aesthetics. Make sure to check out all of our pond aerator fountains.  Advanced Aeration for Optimal Pond Health The Kasco VFX Series Pond Aerating Fountain not only amplifies the appeal of your pond but also actively contributes to the ecosystem's health. Its advanced aeration technology boosts oxygen levels in the water, fostering a better environment for aquatic life. By preventing stagnation and maintaining optimum water conditions, this fountain can combat algae growth and mosquito infestation, safeguarding the biodiversity within your pond. Easy Installation, Minimal Maintenance Fret not about complicated installation processes or high maintenance. The Kasco VFX Series Pond Aerating Fountain is designed with your convenience in mind. Easy to set up and operate, this efficient water feature requires minimal maintenance, ensuring you can relish its enchanting beauty and benefits without undue hassle. Built with robust materials, the fountain promises longevity and reliable performance. 
Scott Aerator Atriarch Pond Fountain Scott Aerator Atriarch Pond Fountain
Scott Aerator Atriarch Pond Fountain from $2,839.00
  Pump Size Spray Size Flow Rate 1 HP 30' High x 25' Diameter 75 gpm 1.5 HP 40' High x 35' Diameter 115 gpm 2 HP 50' High x 40' Diameter 155 gpm 3 HP 60' High x 50' Diameter 170 gpm     Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Atriarch nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1 HP, 1.5 HP, 2 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks.     LED Lights (Optional)   Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP.   Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included     Timers (Optional) Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.   115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D   With the 3-hp motor, the Atriarch's elegant appearance soars to new heights, enhancing your outdoor living area and raising the value of your home. Eight separate brass nozzles surround a solid brass center nozzle to create a multipurpose water feature that can be used for both residential and commercial purposes. The 3-hp Atriarch was designed to perform flawlessly for many years in a variety of applications. The Atriarch fountain, one of the newest products in the Scott Aerator Company product line, is a beautiful addition to any pond or lake scape. The Atriarch's elegant appearance and the serene sound of its cascading water enhance outdoor living while increasing the value of your investment. Eight distinct brass nozzles are arranged around a solid brass center nozzle to give the Atriarch its vibrant appearance.  This water feature is adaptable for both residential and commercial use. The Atriarch was designed to perform flawlessly for many years in a variety of applications. It comes with a 100-foot 12-gauge submersible electric cable. Longer lengths of electric cable are available for purchase. Purchasable light sets as well as later additions are both options. Features: There is no upkeep required. Fast Performing.  Powerful Flow. 
Scott Aerator Triad Pond Fountain Scott Aerator Triad Pond Fountain
Scott Aerator Triad Pond Fountain from $2,929.00
1 HP Spray Sizes  Cambridge 30' H x 40' W Skyward 30' H x 42' W Gusher 30' H x 6' W   1.5 HP Spray Sizes  Cambridge 35' H x 45' W Skyward 40' H x 50' W Gusher 35' H x 6' W   3 HP Spray Sizes Cambridge 40' H x 55' W Skyward 50' H x 70' W Gusher 35' H x 6' W   Floating pond & lake fountain with 3 display options. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, 3 nozzles, float, bottom screen and power cord.  Nozzles included: Cambridge, Skyward & Gusher. Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and  Business Parks.  Fountains included in this package Cambridge Fountain Skyward Fountain Gusher Fountain Our Triad fountain, the newest addition to the Scott Aerator Company product range, will provide your outdoor paradise with a stunning focal point while also significantly enhancing the health of your pond. Both 115V and 230V motors are available for this lovely fountain. This water feature comes with three separate brass nozzles that can all be changed in a matter of minutes without the use of any tools.   All of the water features created by the Scott Aerator Company were developed to do away with the need for pricy, time-consuming winterizing supplies and procedures. Leave your fountain running, switch off the electricity, and ignore it all winter. Restore power to the device once the water thaws in the spring, and you're ready to go. All parts can resist temperatures below zero without suffering damage. It has a strong, oil-free motor that is built to run continuously. You may be confident that this fountain will survive for many years because it also has a 5-year motor warranty. The Scott Aerator Triad Pond Fountain can circulate 75 gallons of water every minute, which will make for a stunning display in your lake or pond. Features: The electric cable provided is 100 feet long, 12-gauge submersible, and has greater lengths available. Light kits can be added at purchase or at a later date. Approved for use in saltwater. Two 25-pound weights or concrete blocks are required for anchoring (not included). Two nylon ropes are required for anchoring (not included). They are designed for 24-hour-per-day operation. 34-inch minimum pond depth required.
Kasco J Series Decorative Pond Fountain, 5 HP Kasco J Series Decorative Pond Fountain, 5 HP
Kasco J Series Decorative Pond Fountain, 5 HP from $8,441.00
Features:    Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord     Nozzle Style Spray Size Birch 24' x 14' Redwood 32' x 6' Spruce 31' x 12' Balsam 18' x 34' Linden 24.5' x 46'     Welcome Serenity with Kasco J Series Fountain Upgrade your outdoor aesthetics with the Kasco J Series Decorative Pond Fountain. Featuring a commanding 5 HP motor, it promises a captivating water display while fostering a healthy environment for your pond. This extraordinary blend of superior functionality and striking design turns your pond into a haven of peace and beauty. Powerful Performance Encased in Exceptional Beauty The Kasco J Series Fountain does more than please the eye. Its strong 5 HP motor ensures a lively water display and oxygenates your pond, creating a nourishing atmosphere for aquatic life. Built for all weather conditions, this fountain guarantees sustained beauty and performance, making it a centerpiece of your outdoor space. Effortless Installation, Unforgettable Impact With the Kasco J Series Fountain, you can forget about installation woes. Its easy-to-setup kit ensures that you'll enjoy the mesmerizing appeal of your new fountain in no time. Make your pond a standout feature, garnering admiration from every observer. Witness the transformation of your pond into a stunning showcase of elegance and charm.  
Bearon Aquatics Aphrodite Pond Fountain Bearon Aquatics Aphrodite Pond Fountain
Bearon Aquatics Aphrodite Pond Fountain from $3,775.00
Bearon Aquatics is proud to introduce its Olympus Series Fountains – sturdy, efficient without sacrificing height or diameter, and so unique in beauty, we named each after a Greek God. Our decorative fountains offer elegance to your pond with a choice of eight beautiful patterns. Every fountain is simple to install and maintain. Our exceptional design and construction can produce stunning patterns with significantly less horsepower than our competitors, meaning lower operating costs for you.   Weight 500 lbs Dimensions 11 × 9 × 8 in Horsepower .33 Voltage 115V, 230V Cord 50', 100', 150', 200'
Air-O-Lator Font`N-Aire Ready 1HP Pond Aerating Fountain Air-O-Lator Font`N-Aire Ready 1HP Pond Aerating Fountain
Air-O-Lator Font`N-Aire Ready 1HP Pond Aerating Fountain from $3,975.00
The Font’N-Aire Ready 1HP fountain line has four major components:   FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with nonhygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), propeller (Carnival Nozzle), and single phase motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain. CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is especially designed for lake and pond fountain applications and is environmentally safe. The PROPELLER PUMP AERATING FOUNTAIN (with our scientifically engineered foul-resistant propeller) pumps 1,000 gallons of water per minute into the air through a specifically designed nozzle (Carnival). This causes the large column of water to shear into millions of micro droplets exposing more water to the atmosphere. As the aerated water returns to the parent body of water surface, turbulence is created in a 360 degree radius outward from the fountain increasing the interface of air to water, therefore transferring the atmospheric oxygen to the water. Tips to pick the perfect pond fountain including the Font’N-Aire Ready 1HP: How Big is Your Pond? The size of the pond also matters, along with the shape. A large fountain with a motor of 1.5 HP is enough for an acre of water coverage. Depending on the shape of the pond, a simple V-shaped spraying pattern should do the job perfectly. You may need to install two fountains if your pond is larger than an acre and deeper than 6 feet. If you’re investing in a water fountain purely for decoration purposes, you won’t need to consider the HP of the motor. Another thing to consider is the type of powered fountain you are getting for your pond.  
Air-O-Lator Font`N-Aire Platinum 2HP Pond Aerating Fountain Air-O-Lator Font`N-Aire Platinum 2HP Pond Aerating Fountain
Air-O-Lator Font`N-Aire Platinum 2HP Pond Aerating Fountain from $6,120.00
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. 3 year Limited Warranty 2HP – 8′ Tall x 25′ Width   The Font`N-Aire Platinum 2HP fountain line has four major components: The FLOAT is constructed of rugged polyethylene molded plastic with UV inhibitors. Additionally, it is filled with non-hygroscopic pressure molded polystyrene foam, providing enhanced durability and buoyancy. The POWER DRIVE ASSEMBLY comprises a mounting structure (drive structure assembly), pump/propeller, nozzle, and motor, all working together to drive the fountain system. On the other hand, the ELECTRICAL SERVICE CABLE ASSEMBLY consists of a standard 100’ length of AWG# 12/4 submersible cable. It is accompanied by a submersible quick disconnect connector that conveniently plugs into the fountain, ensuring a secure electrical connection. The CONTROLS encompass various components, such as a 24-hour time clock, off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. These components are prewired and thoughtfully mounted on a 16” x 14” plate. It is worth noting that Air-O-Lator relies solely on the Franklin Electric 600M submersible motor for all fountain lines. This motor is specifically engineered for lake and pond fountain applications, ensuring both water cooling and lubrication. Furthermore, it prioritizes environmental safety as an integral feature. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN’s distinctive center discharge pump design ensures that both the shaft of the submersible motor and the discharge remain in a vertical position. Consequently, this design feature allows the entire weight of the fountain to be concentrated in the center of the float. Moreover, this design facilitates the easy installation and removal of the fountain from the float, eliminating the need for special mounting brackets or hardware. More information: Additionally, our centrifugal pump design excels at producing high pressure, enabling the creation of impressive heights and displays while requiring significantly less horsepower compared to other fountain equipment. It is important to note that this fountain is intended solely for aesthetic purposes, as the volume of water being pumped into the air is not sufficient to be considered an aerating device according to oxygen transfer testing and Air-O-Lator’s stringent standards.  
Air-O-Lator Font`N-Aire Platinum 3HP Pond Aerating Fountain Air-O-Lator Font`N-Aire Platinum 3HP Pond Aerating Fountain
Air-O-Lator Font`N-Aire Platinum 3HP Pond Aerating Fountain from $7,020.00
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. • 3 year Limited Warranty 3HP – 9′ Tall x 30′ Width   The Font`N-Aire Platinum 3HP fountain line has four major components: The FLOAT is constructed of rugged polyethylene molded plastic with UV inhibitors. Additionally, it is filled with non-hygroscopic pressure molded polystyrene foam, providing enhanced durability and buoyancy. The POWER DRIVE ASSEMBLY comprises a mounting structure (drive structure assembly), pump/propeller, nozzle, and motor, all working together to drive the fountain system. On the other hand, the ELECTRICAL SERVICE CABLE ASSEMBLY consists of a standard 100’ length of AWG# 12/4 submersible cable. It is accompanied by a submersible quick disconnect connector that conveniently plugs into the fountain, ensuring a secure electrical connection. The CONTROLS encompass various components, such as a 24-hour time clock, off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. These components are prewired and thoughtfully mounted on a 16” x 14” plate. It is worth noting that Air-O-Lator relies solely on the Franklin Electric 600M submersible motor for all fountain lines. This motor is specifically engineered for lake and pond fountain applications, ensuring both water cooling and lubrication. Furthermore, it prioritizes environmental safety as an integral feature. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN’s distinctive center discharge pump design ensures that both the shaft of the submersible motor and the discharge remain in a vertical position. Consequently, this design feature allows the entire weight of the fountain to be concentrated in the center of the float. Moreover, this design facilitates the easy installation and removal of the fountain from the float, eliminating the need for special mounting brackets or hardware. More information: Additionally, our centrifugal pump design excels at producing high pressure, enabling the creation of impressive heights and displays while requiring significantly less horsepower compared to other fountain equipment. It is important to note that this fountain is intended solely for aesthetic purposes, as the volume of water being pumped into the air is not sufficient to be considered an aerating device according to oxygen transfer testing and Air-O-Lator’s stringent standards.  
Air-O-Lator Font`N-Aire Platinum 5HP Pond Aerating Fountain Air-O-Lator Font`N-Aire Platinum 5HP Pond Aerating Fountain
Air-O-Lator Font`N-Aire Platinum 5HP Pond Aerating Fountain from $8,620.00
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. 3 year Limited Warranty 5HP – 11′ Tall x 35′ Width   The Font`N-Aire Platinum 5HP fountain line has four major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor. ELECTRICAL SERVICE CABLE ASSEMBLY – Consisting of a standard 100’ length of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which conveniently plugs into the fountain. CONTROLS – These controls feature a 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. Additionally, all of these components come prewired and mounted on a 16” x 14” plate. It is noteworthy that Air-O-Lator exclusively employs the Franklin Electric 600M submersible motor for all fountain lines. This water-cooled and lubricated motor is purposefully designed for lake and pond fountain applications, ensuring environmental safety. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN’s distinctive center discharge pump design ensures that both the shaft of the submersible motor and the discharge remain in a vertical position. Consequently, this design feature allows the entire weight of the fountain to be concentrated in the center of the float. Moreover, this design facilitates the easy installation and removal of the fountain from the float, eliminating the need for special mounting brackets or hardware. Additionally, our centrifugal pump design excels at producing high pressure, enabling the creation of impressive heights and displays while requiring significantly less horsepower compared to other fountain equipment. It is important to note that this fountain is intended solely for aesthetic purposes, as the volume of water being pumped into the air is not sufficient to be considered an aerating device according to oxygen transfer testing and Air-O-Lator’s stringent standards.  
Air-O-Lator 3/4 HP Classic Series Display Pond Fountain Air-O-Lator 3/4 HP Classic Series Display Pond Fountain
Air-O-Lator 3/4 HP Classic Series Display Pond Fountain from $4,060.95
Specs Pump and Motor Industry proven submersible pump and motor (Made in the U.S.A.) 230v Single Phase Includes 100′ or 150′ power cord 100% stainless steel components to resist corrosion Optimized hydraulics that increase performance and efficiency Octagonal bearings protect against abrasive particles   Lights (Optional) (2) long lasting energy efficient LED lights Stainless steel housing with tempered glass lenses Separate timer for lights     Nozzle – Spray Height and Width Orion Nozzle – 21′ Tall x 30′ Wide Sirius Nozzle – 21′ Tall x 32′ Wide Nebula Nozzle – 19′ Tall x 27′ Wide Spectrum Nozzle – 19 ‘Tall x 21’ Wide Tornado Nozzle – 12′ Tall x 40′ Wide Tornado + Geyser – 16′ Tall x 36′ Wide Warranty Full industry leading 4 year warranty on the pump and motor 3 year warranty on the floats and power cables 2 year warranty on the control panels and lights
Air-O-Lator 1 1/2 HP Classic Series Display Pond Fountain Air-O-Lator 1 1/2 HP Classic Series Display Pond Fountain
Air-O-Lator 1 1/2 HP Classic Series Display Pond Fountain from $5,495.95
Specs Pump and Motor Industry proven submersible pump and motor (Made in the U.S.A.) 230v Single Phase 100% stainless steel components to resist corrosion Includes 150', 200′, or 250′ power cord. Optimized hydraulics that increase performance and efficiency Octagonal bearings protect against abrasive particles   Lights (Optional) (2) long lasting energy efficient LED lights Stainless steel housing with tempered glass lenses Separate timer for lights     Nozzle - Spray Height and Width Orion Nozzle – 21′ Tall x 30′ Wide Sirius Nozzle – 21′ Tall x 32′ Wide Nebula Nozzle – 19′ Tall x 27′ Wide Spectrum Nozzle – 19 ‘Tall x 21’ Wide Tornado Nozzle – 12′ Tall x 40′ Wide Tornado + Geyser – 16′ Tall x 36′ Wide   Warranty Full industry leading 4 year warranty on the pump and motor 3 year warranty on the floats and power cables 2 year warranty on the control panels and lights
Air-O-Lator 2 HP Classic Series Display Pond Fountain Air-O-Lator 2 HP Classic Series Display Pond Fountain
Air-O-Lator 2 HP Classic Series Display Pond Fountain from $6,995.95
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. 3 year Limited Warranty  Lights (Optional) (4) Low Voltage energy efficient LED lights Stainless steel housing with tempered glass lenses Separate timer for lights     Nozzle - Spray Height and Width Orion Nozzle – 22′ Tall x 32′ Wide Sirius Nozzle – 22′ Tall x 36′ Wide Nebula Nozzle – 21′ Tall x 30′ Wide Spectrum Nozzle – 20 ‘Tall x 23’ Wide Tornado Nozzle – 15′ Tall x 42′ Wide Tornado + Geyser – 18′ Tall x 38′ Wide   Warranty Full industry leading 4 year warranty on the pump and motor 3 year warranty on the floats and power cables 2 year warranty on the control panels and lights     The Font`N-Aire Platinum 2HP fountain line has four major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor. ELECTRICAL SERVICE CABLE ASSEMBLY – Consisting of a standard 100’ length of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which conveniently plugs into the fountain. CONTROLS – These controls feature a 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector. Additionally, all of these components come prewired and mounted on a 16” x 14” plate. It is noteworthy that Air-O-Lator exclusively employs the Franklin Electric 600M submersible motor for all fountain lines. This water-cooled and lubricated motor is purposefully designed for lake and pond fountain applications, ensuring environmental safety. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN’s distinctive center discharge pump design ensures that both the shaft of the submersible motor and the discharge remain in a vertical position. Consequently, this design feature allows the entire weight of the fountain to be concentrated in the center of the float. Moreover, this design facilitates the easy installation and removal of the fountain from the float, eliminating the need for special mounting brackets or hardware. Additionally, our centrifugal pump design excels at producing high pressure, enabling the creation of impressive heights and displays while requiring significantly less horsepower compared to other fountain equipment. It is important to note that this fountain is intended solely for aesthetic purposes, as the volume of water being pumped into the air is not sufficient to be considered an aerating device according to oxygen transfer testing and Air-O-Lator’s stringent standards.
Air-O-Lator 3 HP Classic Series Display Pond Fountain Air-O-Lator 3 HP Classic Series Display Pond Fountain
Air-O-Lator 3 HP Classic Series Display Pond Fountain from $8,195.95
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable minimum. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. 3 year Limited Warranty   Lights (Optional) (4) Low Voltage energy efficient LED lights Stainless steel housing with tempered glass lenses Separate timer for lights     Nozzle - Spray Height and Width Orion Nozzle – 24′ Tall x 45′ Wide Sirius Nozzle – 24′ Tall x 40′ Wide Nebula Nozzle – 24′ Tall x 50′ Wide Spectrum Nozzle – 22′ Tall x 30’ Wide Tornado Nozzle – 16′ Tall x 45′ Wide Tornado + Geyser – 21′ Tall x 45′ Wide   Warranty Full industry leading 4 year warranty on the pump and motor 3 year warranty on the floats and power cables 2 year warranty on the control panels and lights   The Font`N-Aire Platinum 3HP fountain line has four major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (minimum) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain. CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is specifically designed for lake and pond fountain applications and is environmentally safe. The PROPELLER PUMP AERATING FOUNTAIN, equipped with our scientifically engineered foul-resistant propeller, effectively pumps a large volume of water into the air through a specifically designed nozzle called “Carnival.” Consequently, this action causes the substantial column of water to shear into millions of micro droplets, resulting in an increased exposure of water to the atmosphere. Subsequently, as the aerated water returns to the surface of the parent body of water, it generates turbulence in a 360-degree radius surrounding the fountain. This turbulence significantly enhances the interface between air and water, facilitating the transfer of atmospheric oxygen to the water.
Air-O-Lator 5 HP Classic Series Display Pond Fountain Air-O-Lator 5 HP Classic Series Display Pond Fountain
Air-O-Lator 5 HP Classic Series Display Pond Fountain from $10,325.95
Features: No seals or bearings to maintain. High speed, foul resistant propellers or impellers, provide high shear water spraying action. No lazy sprays, bubbles, or slow boil of water. One piece square flotation for stability to minimize any oscillation that can occur with round floats. Watertight, removable, 100’ power cable is standard. Additional cable lengths are available in 50’ increments. ETL listed (ANSI/UL508) control panel with time clock (adjustable in 15-minute increments), and Equipment Leakage Circuit Interrupter (ELCI) (US only). Exclusive Franklin Electric Sand Fighter submersible motor, which implements the use of a silicon carbide mechanical sealing system. 3 year Limited Warranty   Lights (Optional) (2) long lasting energy efficient LED lights Stainless steel housing with tempered glass lenses Separate timer for lights Red, green and blue lenses available for added ambience     Nozzle - Spray Height and Width Orion Nozzle – 30′ Tall x 80′ Wide Sirius Nozzle – 31′ Tall x 81′ Wide Nebula Nozzle – 29′ Tall x 75′ Wide Spectrum Nozzle – 29′ Tall x 41’ Wide Tornado Nozzle – 18′ Tall x 70′ Wide Tornado + Geyser – 26′ Tall x 65′ Wide   Warranty Full industry leading 4 year warranty on the pump and motor 3 year warranty on the floats and power cables 2 year warranty on the control panels and lights   The Font`N-Aire Platinum 5HP fountain line has four major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), pump/propeller, nozzle, and motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain. CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box, and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is specifically designed for lake and pond fountain applications and is environmentally safe. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN offers a unique center discharge pump design that maintains the vertical position of the submersible motor and discharge. As a result, the entire weight of the fountain remains centered on the float. Additionally, this design facilitates easy installation and removal from the float without the need for special mounting brackets or hardware. Moreover, our centrifugal pump design generates high pressure, enabling impressive heights and displays with significantly lower horsepower requirements compared to other fountain equipment. However, it’s important to note that this fountain is primarily intended for aesthetic purposes. While it pumps water into the air, the volume is insufficient to qualify as an aerating device according to oxygen transfer testing and Air-O-Lator’s standards.
Air O Later Font`N-Aire Legacy Pond Fountain, 1/2 HP Air O Later Font`N-Aire Legacy Pond Fountain, 1/2 HP
Air O Later Font`N-Aire Legacy Pond Fountain, 1/2 HP $1,995.00
Font`N-Aire Legacy 1/2HP High Quality and Yet Affordable Font`N-Aire Legacy 1/2HP made by Air-O-Lator in the U.S.A. The Font’N-Aire Legacy fountain line has five major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam, measuring 24” x 24” with only 3” in thickness. SUPPORT CHAMBER – holds the fountain in place on the flotation device. POWER DRIVE ASSEMBLY – motor mount, centrifugal pump, nozzle and a motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/3 submersible cable. TIMER – 24-hour time clock with multiple off/on trippers. Air-O-Lator fountain lines use the Franklin Electric submersible motor exclusively, which is specially designed for lake and pond fountain applications. This water-cooled and lubricated motor is environmentally safe. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN boasts a distinctive center discharge pump design that keeps the submersible motor shaft and discharge in a vertical position. This design feature ensures that the entire weight of the fountain remains in the center of the float, making installation and removal from the float easy without requiring special mounting brackets or hardware. Additionally, our centrifugal pump generates high pressure, enabling impressive fountain heights and displays with significantly lower horsepower than other fountain equipment. However, this fountain should only be used for aesthetic purposes as the volume of water pumped into the air is insufficient to qualify as an aerating device according to Air-O-Lator’s standards for oxygen transfer testing. The Palatial Solar fountain comes with a choice of five different nozzle spray patterns, and it operates via direct drive without batteries, running only during daylight hours. Optional Light Kits: Option 1:  (2) High Quality RGB lights by Aspect Lighting.  These LED landscape lights are waterproof (with an IP65 rating) and feature an aluminum body. These lights come standard with a clear glass trim.  Each are 9 watt RGB lights and offer the full spectrum of colors including white.  This option includes a remote and is 24v low voltage and includes a photocell timer. Option 2:  (3) High Quality White LED lights.  They are also waterproof with an IP65 rating and feature a durable die cast metal housing.  Each are 6 watts and are 24v low voltage.  Includes a photocell timer.   Cable Length 100 ft, 150ft. Lights No Light Kit, With RGB Lights, With White Lights
Vertex Vertical TriTier Lake Fountain Vertex Vertical TriTier Lake Fountain
Vertex Vertical TriTier Lake Fountain from $7,520.00
Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, and 5 HP. Suggested LED Lighting Packages: 2 lights for 2 HP and 3 HP 3 lights for 5 HP    Motor HP Height 1 Height 2 Height 3 2 18' 10' 4' 3 23' 13' 6' 5 26' 12' 6'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex Vertical FunnelJet Floating Lake Fountain Vertex Vertical FunnelJet Floating Lake Fountain
Vertex Vertical FunnelJet Floating Lake Fountain from $7,040.00
Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP and 5 HP. Suggested LED Lighting Packages: 3 lights for all sizes.    Motor HP Spray Height Spray Diameter 2 6' 25' 3 7' 30' 5 8'' 35''   Warranty Coverage:    All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex Vertical TwoTier Commercial Lake Fountain Vertex Vertical TwoTier Commercial Lake Fountain
Vertex Vertical TwoTier Commercial Lake Fountain from $7,520.00
Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, and 5 HP. Suggested LED Lighting Packages: 2 lights for 2 HP and 3 HP 3 lights for 5 HP    Motor HP Center Height Side Height Spray Diameter 2 18' 8' 20' 3 23' 10' 25' 5 26' 12' 30'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex GeyserJet Commercial Fountain Vertex GeyserJet Commercial Fountain
Vertex GeyserJet Commercial Fountain from $9,000.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, 5 HP, 7.5 HP, 10 HP, 15 HP, and 20 HP. Suggested LED Lighting Packages: 2 lights for 2 HP and 3 HP 3 lights for 5 HP 4 lights for 7.5 HP and 10 HP 5 lights for 15 HP 6 lights for 20 HP    Motor HP Spray Height Spray Diameter 2 8' 4' 3 12' 4' 5 18' 5' 7.5 22' 6' 10 25' 4' 15 28' 8' 20 30' 8'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex TriTier Commercial Fountain Vertex TriTier Commercial Fountain
Vertex TriTier Commercial Fountain from $9,110.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, 5 HP, 7.5 HP, 10 HP, and 15 HP. Suggested LED Lighting Packages: 2 lights for 2 HP and 3 HP 3 lights for 5 HP 4 lights for 7.5 HP and 10 HP 5 lights for 15 HP    Motor HP Height 1 Height 2 Height 3 2 18' 8' 4' 3 23' 10' 5' 5 26' 12' 6' 7.5 30' 15' 7' 10 35' 17' 8' 15 40' 20' 10'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex TwoTier Commercial Lake Fountain Vertex TwoTier Commercial Lake Fountain
Vertex TwoTier Commercial Lake Fountain from $9,110.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, 5 HP, 7.5 HP, 10 HP, and 15 HP. Suggested LED Lighting Packages: 2 lights for 2 HP and 3 HP 3 lights for 5 HP 4 lights for 7.5 HP and 10 HP 5 lights for 15 HP    Motor HP Center Height Side Height Spray Diameter 2 18' 8' 20' 3 23' 10' 25' 5 26' 12' 30' 7.5 30' 15' 35' 10 35' 17' 40' 15 40' 20' 45'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex FunnelJet Floating Fountain Vertex FunnelJet Floating Fountain
Vertex FunnelJet Floating Fountain from $8,610.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP 5 HP, 7.5 HP, and 10 HP. Suggested LED Lighting Packages: 3 lights for all sizes.    Motor HP Spray Height Spray Diameter 2 6' 25' 3 7' 30' 5 8'' 35'' 7.5 8'' 45' 10 9' 50'   Warranty Coverage All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex AerationJet Commercial Lake Fountain Vertex AerationJet Commercial Lake Fountain
Vertex AerationJet Commercial Lake Fountain from $29,650.00
  Features:  Floating lake fountain designed for large-scale commercial application. Available in 5 HP, 7.5 HP, 10 HP, 15 HP, 20 HP and 30 HP. Suggested LED Lighting Packages: 8 lights for 5 HP and 7.5 HP 9 lights for 10 HP 10 lights for 15 HP 11 lights for 20 HP and 30 HP   Spray Pattern:   Motor HP Center Height Side Height Spray Diameter 5 20' 10' 20' 7.5 25' 12' 25' 10 30' 15' 30' 15 35' 20' 33' 20 40' 20' 35' 30 45' 25' 40'   Warranty All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex FanJet Commercial Lake Fountain Vertex FanJet Commercial Lake Fountain
Vertex FanJet Commercial Lake Fountain from $30,750.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 10 HP, 15 HP, 20 HP and 30 HP. Suggested LED Lighting Packages 7 lights for 10 HP 7 lights for 15 HP 9 lights for 20 HP and 30 HP    Motor HP Center Height Side Height Spray Diameter 10 25' 8' 35' 15 30' 10' 40' 20 35' 12' 45' 30 45' 15' 50'   Warranty Coverage All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year    
Vertex TriGeyser Commercial Fountain Vertex TriGeyser Commercial Fountain
Vertex TriGeyser Commercial Fountain from $26,660.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 10 HP, 15 HP, 20 HP and 30 HP. Suggested LED Lighting Packages: 6 lights for all sizes    Motor HP HT 1 HT 2 HT 3 Diam. 10 15' 10' 6' 8' 15 18' 12' 8' 9' 20 22' 15' 10' 10' 30 25' 18' 12' 12'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex RingJet Commercial Fountain Vertex RingJet Commercial Fountain
Vertex RingJet Commercial Fountain from $16,060.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 2 HP, 3 HP, 5 HP, 7.5 HP, 10 HP, and 15 HP. Suggested LED Lighting Packages: 3 lights for 2 HP and 3 HP 4 lights for 5 HP and 7.5 HP 5 lights for 10 HP and 15 HP    Motor HP Center Height Side Height Spray Diameter 2 15' 8' 15' 3 20' 10' 20' 5 25' 12' 25' 7.5 30' 15' 30' 10 40' 18' 35' 15 45' 20' 40'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Vertex TriPod Commercial Lake Fountain Vertex TriPod Commercial Lake Fountain
Vertex TriPod Commercial Lake Fountain from $31,850.00
  Fountain Features:  Floating lake fountain designed for large-scale commercial application. Available in 10 HP, 15 HP, 20 HP and 30 HP. Suggested LED Lighting Packages: 6 lights for for 10 HP 7 lights for 15 HP 9 lights for 20 HP and 30 HP    Motor HP HT 1 HT 2 HT 3 10 20' 15' 10' 15 25' 20' 15' 20 30' 25' 20' 30 40' 30' 25'   Warranty Coverage:  All Vertex floating lake fountain designs go through extensive production quality control processes as well as continued testing after installation to ensure your product lasts. Display heads: 4-years Pumps and motors: 4-years LED Lighting: 2-years Control Panel: 1-year   
Kasco J Series Decorative Pond Fountain, 2 HP, 8400 jf Kasco J Series Decorative Pond Fountain, 2 HP, 8400 jf
Kasco J Series Decorative Pond Fountain, 2 HP, 8400 jf from $5,721.00
Features:  Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord   Nozzle Style Spray Size Birch 11' H x 10' W Redwood 22' H x 6' W Spruce 21' H x 10' W Balsam 14' H x 32' W Linden 15.5' H x 38' W     Bask in the Splendor of Kasco J Series Fountain Elevate your outdoor experience with the Kasco J Series Decorative Pond Fountain. Its potent 2 HP motor promises a breathtaking water display while actively maintaining your pond's ecosystem. This seamless blend of beauty and functionality transforms your pond into a true sanctuary of tranquility and elegance. Powerful Performance Meets Majestic Design With the Kasco J Series Fountain, experience the dual delight of visual appeal and superior performance. Its strong 2 HP motor ensures a dynamic and captivating water display while oxygenating your pond to create an optimal environment for aquatic life. Its all-weather resilient design promises durability and continued aesthetic pleasure. Hassle-Free Installation, Lasting Impressions Leave behind the complications of fountain installations. The Kasco J Series Fountain offers an easy-installation kit that helps you set up your new fountain effortlessly. Transform your pond into an enchanting spectacle that will attract admiration from every corner. Witness your pond becoming the pinnacle of beauty and grandeur.
Kasco J Series Decorative Pond Fountain, 3 HP Kasco J Series Decorative Pond Fountain, 3 HP
Kasco J Series Decorative Pond Fountain, 3 HP from $6,747.00
Features:  Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord   Nozzle Style Spray Size Birch 16' x 12' Redwood 27' x 6' Spruce 26' x 12' Balsam 19' x 34' Linden 20.5' x 38'      Experience Elegance with Kasco J Series Fountain Transform your outdoor space into an oasis of tranquility with the Kasco J Series Decorative Pond Fountain. Its powerful 3 HP motor delivers a stunning water display while actively contributing to your pond's health. This impeccable fusion of aesthetic charm and high performance redefines your pond into a mesmerizing spectacle of elegance. Exquisite Design Meets Unrivaled Performance The Kasco J Series Fountain isn't just a visual marvel. With a robust 3 HP motor, it promises a dynamic water display while oxygenating your pond, fostering a thriving environment for aquatic life. Its weather-resistant design ensures enduring performance, marrying long-lasting beauty with functionality. Installation Made Simple, Impressions Made Lasting The complexities of fountain installations are a thing of the past with the Kasco J Series Fountain. Equipped with a user-friendly installation kit, you'll enjoy the allure of your new fountain in no time. Make your pond a captivating centerpiece that leaves a lasting impression on all who visit. Watch as your pond morphs into an emblem of refined beauty.
Kasco J Series Decorative Pond Fountain, 7.5 HP Kasco J Series Decorative Pond Fountain, 7.5 HP
Kasco J Series Decorative Pond Fountain, 7.5 HP from $10,941.00
Features:  Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord       Nozzle Style Spray Size Birch 26' H X 16' W Redwood 36' H X 8' W Spruce 34' H X 12' W Balsam 21' H X 36' W Linden 26' H X 46' W     Illuminate Your Backyard Oasis The Kasco J Series Decorative Pond Fountain is a visually stunning addition to any outdoor landscape. This 7.5 HP powerhouse not only creates an appealing aquatic show but also promotes healthier pond ecosystems. Its robust performance ensures a constant flow of water, enhancing oxygen levels and keeping your pond water crystal clear. Revel in the breathtaking beauty and serene ambiance the fountain brings to your home. Reliability and Efficiency: A Symbiotic Pairing When it comes to fountains, longevity and power efficiency are paramount. This 7.5 HP Kasco J Series Fountain excels in both aspects. With an industry-leading warranty and low operating costs, this pond fountain is the epitome of dependability. Its energy-efficient design ensures optimal operation, turning your garden into a mesmerizing showpiece without inflating your energy bills. A Fusion of Aesthetics and Functionality Our Kasco J Series Decorative Pond Fountain is the perfect blend of form and function. Its design is not just about creating stunning water displays, but also maintaining the well-being of your pond. The continuous water movement aids in controlling algae growth and eliminating stagnant water, creating a healthier environment for your pond's inhabitants.  
Kasco J Series Decorative Pond Fountain, 3/4 HP, 3400JF Kasco J Series Decorative Pond Fountain, 3/4 HP, 3400JF
Kasco J Series Decorative Pond Fountain, 3/4 HP, 3400JF from $1,996.00
Features:  Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord     Spray Nozzle Spray Size Linde 9' x 29' Sequoia 13' x 8' Birch 7' x 5' Willow 6.5' x 21' Cypress 7' x 17'     Effortless Serenity With the Kasco J Series Fountain Enter a world of tranquility and beauty with the Kasco J Series Decorative Pond Fountain. This 3/4 HP masterpiece combines the power of innovation and the art of aesthetics to transform any pond into a mesmerizing spectacle. With its exceptional design, it beautifully aerates your water body while creating stunning water displays, providing a tranquil space for relaxation and rejuvenation. A Marriage of Aesthetics and Performance Kasco's J Series Fountain not only accentuates your pond's beauty, but it's also a powerhouse of performance. Its 3/4 HP motor ensures consistent and powerful water display, keeping your pond oxygen-rich and healthy. And the robust design ensures it's ready for any season. Experience the harmonious blend of beauty and function, enhancing your landscape and providing a healthier environment for aquatic life. Easy Installation, Unforgettable Impressions Forget the complexities of pond fountain installation. The Kasco J Series Fountain comes with an easy-to-install kit that allows you to enjoy the captivating beauty of your new fountain in no time. Add an unforgettable charm to your pond, and be the envy of every visitor or passerby. Watch as your pond transforms into a visually enticing spectacle, making every moment spent near it a truly magical one.   Larger Fountains: 1 HP J Series Fountain 2 HP J Series Fountain 3 HP J Series Fountain 5 HP J Series Fountain 7.5 HP J Series Fountain
Kasco J Series Decorative Pond Fountain, 1 HP, 4400jf Kasco J Series Decorative Pond Fountain, 1 HP, 4400jf
Kasco J Series Decorative Pond Fountain, 1 HP, 4400jf from $2,418.00
Features:  Available as 3/4, 1, 2, 3, 5, and 7.5HP Offered as 60Hz and 50Hz, 120V and 208-240V, and single and three phase options Complete packages are ETL approved to UL and CSA standards 2-year warranty on 3/4HP and 1HP units 3-year warranty on 2HP units (optional 5 year extended warranty available) 5-year warranty on 3, 5, and 7.5HP units 50Hz units include a 2-year warranty   Package Includes:  Motor unit Float Bottom screen 5 Interchangeable nozzles Control panel with GFCI protection Mooring lines Power cord 50Hz units include a motor unit, 15m mooring lines, multiple nozzles, and power cord   Nozzle Style Spray Size Linden 12’ x 31' Sequoia 18’x 11’ Birch 11’ x 8’ Willow 9’ x 31’ Cypress 9’ x 28’     Immerse in Tranquility with Kasco J Series Fountain Bring a sense of serenity and beauty to your outdoor space with the Kasco J Series Decorative Pond Fountain. With its robust 1 HP motor, it promises not just an enthralling water display but also contributes significantly to the health of your pond ecosystem. Immerse yourself in a world where performance meets aesthetic perfection, transforming your pond into a visually striking retreat. Unmatched Performance and Stunning Visual Appeal The Kasco J Series Fountain goes beyond mere decoration. Powered by a potent 1 HP motor, it guarantees an uninterrupted and mesmerizing water display that also oxygenates your pond, maintaining an ideal habitat for aquatic life. Its outstanding design is built for resilience, enduring all weather conditions, promising lasting beauty and functionality. Simplicity in Installation, Grandeur in Impressions Say goodbye to the hassles of complicated installations. The Kasco J Series Fountain comes with a user-friendly installation kit, enabling you to set up and bask in the charm of your new fountain without delay. Add a touch of grandeur to your pond, becoming the center of admiration among visitors. Experience the magic of your pond transitioning into a spectacle of enticing beauty.
Airmax EcoSeries Pond Aerating Fountain Airmax EcoSeries Pond Aerating Fountain
Airmax EcoSeries Pond Aerating Fountain from $2,199.99
Recommended Pond Size Aerates Ponds up to 1/4 Acre Motor Size 1/2 HP Wattage 667 Watts Running Amps 5.8 Amps Voltage 115 Volts Minimum Operating Depth 24 Inches Maximum Spray Height 14 Feet Included Patterns Classic, Crown & Trumpet, Trumpet Optional Spray Patterns Single Arch, Double Arch, Double Arch & Geyser 115V Control Panel Includes Dual Digital Timers up to 8 Run Cycles Available Power Cord Lengths 100', 150', 200', 250', 300', 350', 400' Available Protective Cord Sleeves Standard, PolyFlex, Stainless Steel Warranty 3-Year Daily Operating Cost (8 hrs/day)* $0.53 The EcoSeries Floating Fountain showcases beautiful industry leading spray patterns that outmatch other 3/4 HP and 1 HP fountains. The EcoSeries Fountain operates in as little as 24" of depth and includes an energy-efficient 1/2 HP motor, 3 spray patterns, control panel and comes standard with a 100' power cord. The EcoSeries Fountain is also available in 150', 200', 250', 300', 350' or 400'. Easy to Install - The EcoSeries Fountain was designed for easy installation. No tools are required for assembly or when changing Nozzles. The EcoSeries Fountain is equipped with a quick disconnect cord for easy removal of the motor and float. Energy Efficient - The 1/2 HP motor is energy efficient drawing 5.8 Amps, 667 Watts on 115V power. The asynchronous motor, silicon carbide shaft bearing, and ceramic shaft are housed in a stainless steel body with a suction screen. Spray Patterns - The EcoSeries Fountain comes standard with 3 spray patterns; Classic, Trumpet and Crown & Trumpet. Optional nozzles are available in Single Arch, Double Arch and Double Arch & Geyser. Control Panel - The included Plug & Play Control Panel is set-up to run your fountain and the optional LED Light Set. The control panel comes with a 3-year warranty.
Scott Aerator Gusher Pond Fountain Scott Aerator Gusher Pond Fountain
Scott Aerator Gusher Pond Fountain from $2,089.00
Pump Size Spray Size Flow Rate 1/2 HP 15 FT high 50 gpm 1 HP 25 FT high 70 gpm 1.5 HP 35 FT high 90 gpm 3 HP 50 FT high 175 gpm   Floating pond fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Gusher nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1/2 HP, 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks.   LED Lights (Optional)   Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP.   Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included   Timers (Optional) Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.   115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D   The Scott Aerator Gusher fountains create a highly visible, wind-resistant vertical column of water that adds a magnificent focal point to your property. Around the base of the column, a frothy, highly aerated, cascading stream creates a "white boil" effect that not only sounds delightful, but also helps maintain water clarity. Further, its rapid flow adds abundant oxygen to your water, promoting a healthy aquatic environment while naturally breaking down decaying vegetation. And it deters mosquitoes from breeding.   The Gusher's rugged design and stainless steel construction assure you of years of enjoyment in either fresh or salt water.
Scott Aerator Skyward Pond Fountain Scott Aerator Skyward Pond Fountain
Scott Aerator Skyward Pond Fountain from $2,149.00
Pump Size Spray Size Flow Rate 1/2 HP 20' High x 35' Diameter 50 gpm 1 HP 30' High x 42' Diameter 70 gpm 1.5 HP 40' High x 50' Diameter 90 gpm 3 HP 50' High x 70' Diameter 175 gpm Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Skyward nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks.     LED Lights (Optional)   Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP.   Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included   Timers (Optional) Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.   115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D   There’s nothing quite as mesmerizing as flowing water. Case in point: the cascading water of our Skyward fountains sounds as beautiful as it looks, with a wide, cone-shaped spray that will enhance any lake scene, surrounding a tall, eye-catching column of water.    The fountains’ center spray comes from an all-brass, precision-machined nozzle that can be easily adjusted for height, making these fountains ideal for commercial and residential applications. The center stream reaches heights varying from 20 feet to 70 feet depending on the model, while the side jets reach widths of 35 to 70 feet! Available in ½, 1, 1½, and 3-horsepower versions, Skyward fountains also help create a healthy aquatic environment through oxygen transfer and water circulation.
Scott Aerator Jet Pond Fountain Scott Aerator Jet Pond Fountain
Scott Aerator Jet Pond Fountain from $1,889.00
Pump Size Spray Size Flow Rate 1/2 HP 30 FT high 50 gpm 1 HP 40 FT high 70 gpm 1.5 HP 50 FT high 90 gpm 3 HP 80 FT high 175 gpm     Floating pond & lake fountain. Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not. Comes with fountain pump, Jet Stream nozzle, float, bottom screen and power cord.  Optional lights, additional nozzles & timers available. Designed for 24-hour, 4-season operation.  Easy installation, requires no maintenance.  Available in 1/2 HP, 1 HP, 1.5 HP and 3 HP.  Approved for use in salt water. 5-year motor warranty. ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages. GFCI required. Please disconnect power source when swimmers are present.  Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks.   LED Lights (Optional)   Can be purchased now or added later. Light sets simply screw on to float. 2-light sets recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP. Warm White LED 14-Color LED Single Color Option 14 Color Options Digital Timer Included Digital Timer Included No Remote Control Remote Control Included 110V 110V 2 or 4-Light Fixtures 2 or 4-Light Fixtures Power Cable Included Power Cable Included Timers (Optional) Can be purchased now or added later.  Timers are only made to control fountains, not lights. Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.   115V Timer 230V Timer Operates 115V Pumps Operates 230V Pumps 40 Amp Rating 40 Amp Rating 5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D   A tight vertical column of water spraying up to 50 feet is produced by the Scott Aerator Jet Stream Fountain, which is incredibly beautiful to look at. This beautiful fountain will be the ideal focal point for a pond or lake with the additional lighting options available. The Jet fountain can run continuously and is still environmentally friendly because it is made of stainless steel and has an oil-free submersible motor. This product includes 100 feet of 12-gauge submersible cable as standard, with options for 200 feet.     The Jet fountain is made right here in the USA, is eco-friendly, and is extremely durable. This is supported by a 5-year motor warranty from Scott. To meet the relevant requirements of the UL and the National Electric Code, Scott fountains have undergone ARL testing and approval. The pond that floats and a lake fountain. The only fountains on the market made for year-round use are Scott Aerator fountains. Built to function at any temperature, it can be left in the water all winter long, running or not. Jet Stream nozzle, float, bottom screen, fountain pump, and power cord are all included. Additional nozzles, timers, and lights are available as options. Designed for a year-round, 24-hour operation. Installation is simple and maintenance-free. Features: Jet Stream is the most environmentally friendly type of fountain available because it uses an oil-free, stainless steel submersible motor. Can be purchased now or added later.  Light sets simply screw on to float. 2-light sets are recommended for 1.5 HP and below. 4-light sets recommended for 2 HP & 3 HP.

Free Shipping

Track Your Order All The Way To You.

Quality Support

USA Based Customer Service Team.

Secure Checkout

Encrypted SSL security. Your details are protected.