Air O Lator

Font`N-Aire Legacy 1/2HP High Quality and Yet Affordable Font`N-Aire Legacy 1/2HP made by Air-O-Lator in the U.S.A. The Font’N-Aire Legacy fountain line has five major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with non-hygroscopic pressure molded polystyrene foam, measuring 24” x 24” with only 3” in thickness. SUPPORT CHAMBER – holds the fountain in place on the flotation device. POWER DRIVE ASSEMBLY – motor mount, centrifugal pump, nozzle and a motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/3 submersible cable. TIMER – 24-hour time clock with multiple off/on trippers. Air-O-Lator fountain lines use the Franklin Electric submersible motor exclusively, which is specially designed for lake and pond fountain applications. This water-cooled and lubricated motor is environmentally safe. The CENTRIFUGAL PUMP DISPLAY FOUNTAIN boasts a distinctive center discharge pump design that keeps the submersible motor shaft and discharge in a vertical position. This design feature ensures that the entire weight of the fountain remains in the center of the float, making installation and removal from the float easy without requiring special mounting brackets or hardware. Additionally, our centrifugal pump generates high pressure, enabling impressive fountain heights and displays with significantly lower horsepower than other fountain equipment. However, this fountain should only be used for aesthetic purposes as the volume of water pumped into the air is insufficient to qualify as an aerating device according to Air-O-Lator’s standards for oxygen transfer testing. The Palatial Solar fountain comes with a choice of five different nozzle spray patterns, and it operates via direct drive without batteries, running only during daylight hours. Optional Light Kits: Option 1:  (2) High Quality RGB lights by Aspect Lighting.  These LED landscape lights are waterproof (with an IP65 rating) and feature an aluminum body. These lights come standard with a clear glass trim.  Each are 9 watt RGB lights and offer the full spectrum of colors including white.  This option includes a remote and is 24v low voltage and includes a photocell timer. Option 2:  (3) High Quality White LED lights.  They are also waterproof with an IP65 rating and feature a durable die cast metal housing.  Each are 6 watts and are 24v low voltage.  Includes a photocell timer.   Cable Length 100 ft, 150ft. Lights No Light Kit, With RGB Lights, With White Lights

Font’N-Aire Ready 1HP The Font’N-Aire Ready 1HP fountain line has four major components: FLOAT – constructed of rugged polyethylene molded plastic with UV inhibitors and filled with nonhygroscopic pressure molded polystyrene foam. POWER DRIVE ASSEMBLY – mounting structure (drive structure assembly), propeller (Carnival Nozzle), and single phase motor. ELECTRICAL SERVICE CABLE ASSEMBLY – 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick disconnect connector, which plugs into the fountain. CONTROLS – 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate. Air-O-Lator exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. The water cooled and lubricated motor is especially designed for lake and pond fountain applications and is environmentally safe. The PROPELLER PUMP AERATING FOUNTAIN (with our scientifically engineered foul-resistant propeller) pumps 1,000 gallons of water per minute into the air through a specifically designed nozzle (Carnival). This causes the large column of water to shear into millions of micro droplets exposing more water to the atmosphere. As the aerated water returns to the parent body of water surface, turbulence is created in a 360 degree radius outward from the fountain increasing the interface of air to water, therefore transferring the atmospheric oxygen to the water. Tips to pick the perfect pond fountain including the Font’N-Aire Ready 1HP: How Big is Your Pond? The size of the pond also matters, along with the shape. A large fountain with a motor of 1.5 HP is enough for an acre of water coverage. Depending on the shape of the pond, a simple V-shaped spraying pattern should do the job perfectly. You may need to install two fountains if your pond is larger than an acre and deeper than 6 feet. If you’re investing in a water fountain purely for decoration purposes, you won’t need to consider the HP of the motor. Another thing to consider is the type of powered fountain you are getting for your pond. Solar Pond Fountains Solar fountains are great options if your pond is in a wide-open area. This means free of any obstructions like trees or buildings to keep your solar panels clear. This allows the panels to absorb as much solar power as possible. It’s also a convenient setup to save money on your monthly electric bills. Although solar fountains are great alternatives for your pond, they are much better suited for smaller ponds. You may want to consider electrically powered fountains for large ponds.