2 HP Pond Fountains

Transform your pond into a vibrant centerpiece with our 2 HP pond fountains, designed for medium to large ponds up to two acres. 

Our collection features fountain pumps that deliver high pumping output with minimal power use.

Plus, they come with various spray patterns, like lily and geyser. With these pumps, you can boost aeration for clear water and a healthier pond ecosystem.

Discover our 2 HP pond fountains and transform your pond into the envy of your neighborhood.

Why Choose a 2 HP Pond Fountain?

A 2 HP pond fountain runs on a two-horsepower motor. It pumps water high and wide, allowing ponds of up to two acres to thrive. With these pond fountains, you get solid aeration that replenishes oxygen in your water, helping fish thrive and keeping algae at bay. 

Additionally, the energy-efficient motor uses less power, resulting in lower costs. On the other hand, the optional LED lights elevate the look of your pond and allow you to enjoy the display after sunset.

Finally, multiple nozzles let you switch between lily, arch, and geyser patterns with a simple twist. You end up with a playful water display that brings your pond to life, day and night.

Top Features to Consider

Selecting a fountain comes down to a few essentials. Pump power, energy use, and spray pattern help you choose a model that fits your pond’s size and style.

1. Spray Patterns

Switch between soft lily sprays and bold geyser patterns with a simple twist of the nozzle. 

The high-volume nozzle moves up to 155 GPM of water and reaches heights of nearly 20 ft for a dramatic impact. You can swap in arch or cone nozzles (sold separately) for fresh looks during each season. 

Rapid changes help you match your decorative vision without the need for tools. This flexibility keeps your pond feeling new year‑round.

2. Energy Efficiency

Our 2 HP pumps draw just 12.6 Amps at 230 V, or about 2.3 kW of power. It delivers a consistent flow without skyrocketing your electric bill. 

Featuring low power consumption, this fountain helps keep running costs in check, even during long summer days. The motor runs quietly, too, so it won’t disturb your outdoor moments.

3. Durability

We offer pond and lake fountains built with 304 stainless steel housings and cast iron parts to resist rust and pond debris. 

The oil-free motor shaft eliminates the need for regular lubrication. Meanwhile, a reinforced base and secure anchor system keep the float stable in winds or currents. 

Lastly, parts withstand the winter cold with minimal wear, ensuring reliable performance season after season.

4. Control Panel & Power Cord

Each fountain features a GFCI-protected control panel to ensure safe power around water. Choose cord lengths sold separately to match your setup and avoid stretch or tight bends. 

The quick-disconnect plug allows you to detach the float and cord in seconds for easy cleaning, while a built‑in surge suppressor safeguards against spikes. 

These built‑in safety features make installation and maintenance straightforward.

5. Maintenance Needs

Routine care is simple and quick. Every month, lift the float with the quick‑disconnect and rinse the nozzle and intake screen under a hose. 

Check for debris that can restrict flow or damage seals. In winter, store indoors or use a compatible de‑icer to prevent freezing damage. 

This light service schedule keeps decorative fountains running at peak performance year after year.

Installation & Maintenance Tips for 2 HP Pond Fountain

Getting your 2 HP Pond Fountain up and running is easier than you think. A few smart prep steps will have that stunning 20‑foot spray dancing over your pond in about 20 minutes.

1. Check Pond Depth and Anchor Requirements. 

Before proceeding, confirm that your pond is at least 56 inches deep to ensure the safe operation of your 2 HP Pond Fountain. You will also need a 50-pound anchor block to keep the fountain steady in windy conditions and rough waves.

2. Confirm Power Setup

Ensure you have a 230-volt outlet that can accommodate a 10-gauge submersible cord. Run the cable along a clear path so it will not snag or wear over time.

3. Lay Out and Position Components

Unpack all pieces on dry land and review the included guide for each part. Gently lower the fountain into the center of the pond before you add water around it.

4. Secure with Nylon Lines

Tie the supplied nylon lines from the fountain’s eyebolts to your anchor block. This simple trick holds the fountain upright even when the water gets choppy.

5. Power On and Adjust Spray

Plug in your fountain and watch the spray rise. If the stream tilts or dances too far one way, adjust the tie lines or block until the spray shoots straight up.

6. Maintain and Winterize

 Give the nozzle a quick rinse every few weeks to clear debris and maintain a crisp spray. When freezing temperatures arrive, you can leave it running if you prefer or drain and store it to skip extra winter chores.

Explore Our Selection of 2 HP Pond Fountains at Pond Haven

At Pond Haven, our 2 HP pond fountains deliver beauty and health to larger water gardens. 

With energy-efficient motors, stainless steel construction, and easy setup, you get reliable performance.

Our Scott Aerator North Star and Kasco VFX models feature energy-efficient motors, stainless steel construction, and a simple setup. Every unit comes with a five-year motor warranty and a control panel with built-in GFCI protection. 

Visit our 2 HP collection page for specifications, warranty details, and frequently asked questions.

Frequently Asked Questions (FAQs)

What Size Pond Is Suitable for a 2 HP Fountain?

A 2 HP pond fountain is best suited for ponds up to 2 acres. Its 155 GPM output ensures exhaustive coverage and steady aeration for medium—to large-sized water gardens.

How Much Electricity Does a 2 HP Fountain Consume?

At 230 V and 12.6 A, a 2 HP fountain uses approximately 2,820 watts of power. Its energy‑efficient design helps keep your running costs in check without sacrificing flow.

Can I Install the Fountain Myself, or Do I Need Professional Help?

Most pond owners install their fountain using a quick-disconnect cord and a GFCI-protected control panel. If your setup needs extra wiring or custom adjustments, our support team is just a call or email away.

Other Pond Haven Collections and Products to Check Out:

Pond Aerators | Pond Fountains | Solar Powered Pond Fountains | Rhodan Trolling Motor | Solar Powered Fountains for 1 Acre Pond | 1 Acre Pond Fountains | Solar Pond Aerators | Pond Fountains With Lights | Pond Aerator Fountains | Pond De-icers | Gumotex Products | Scott Aerator Fountains