Scott Aerator Atriarch Pond Fountain

$2,839.00

Pump Size

Power Cord Length

Description Sizing Guide Specs LED Lights & Timers Installation Buying Guide Shipping FAQ

 

Pump Size Spray Size Flow Rate
1 HP 30' High x 25' Diameter 75 gpm
1.5 HP 40' High x 35' Diameter 115 gpm
2 HP 50' High x 40' Diameter 155 gpm
3 HP 60' High x 50' Diameter 170 gpm

 

 

  • Floating pond & lake fountain.
  • Scott Aerator fountains are the only fountains on the market designed for 4-season operation. Built to operate in all temperatures and can be left in the water during the winter whether the unit is running or not.
  • Comes with fountain pump, Atriarch nozzle, float, bottom screen and power cord. 
  • Optional lights, additional nozzles & timers available.
  • Designed for 24-hour, 4-season operation. 
          • Easy installation, requires no maintenance

          • Available in 1 HP, 1.5 HP, 2 HP and 3 HP. 
          • Approved for use in salt water.
            • 5-year motor warranty.
            • ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.
            • GFCI required. Please disconnect power source when swimmers are present. 
            • Common Applications include HOA’s, Golf Courses, Recreational Ponds & Lakes, Commercial Properties, Country Clubs, Retention Ponds, Farm Ponds and Business Parks.

               

               

              LED Lights (Optional)

               

              • Can be purchased now or added later. Light sets simply screw on to float.
                • 2-light sets recommended for 1.5 HP and below.
                • 4-light sets recommended for 2 HP & 3 HP.

                 

                Warm White LED 14-Color LED
                Single Color Option 14 Color Options
                Digital Timer Included Digital Timer Included
                No Remote Control Remote Control Included
                110V 110V
                2 or 4-Light Fixtures 2 or 4-Light Fixtures
                Power Cable Included Power Cable Included

                 

                 

                Timers (Optional)

                • Can be purchased now or added later. 
                • Timers are only made to control fountains, not lights.
                • Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.

                 

                115V Timer 230V Timer
                Operates 115V Pumps Operates 230V Pumps
                40 Amp Rating 40 Amp Rating
                5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D

                 



                With the 3-hp motor, the Atriarch's elegant appearance soars to new heights, enhancing your outdoor living area and raising the value of your home. Eight separate brass nozzles surround a solid brass center nozzle to create a multipurpose water feature that can be used for both residential and commercial purposes. The 3-hp Atriarch was designed to perform flawlessly for many years in a variety of applications.


                The Atriarch fountain, one of the newest products in the Scott Aerator Company product line, is a beautiful addition to any pond or lake scape. The Atriarch's elegant appearance and the serene sound of its cascading water enhance outdoor living while increasing the value of your investment. Eight distinct brass nozzles are arranged around a solid brass center nozzle to give the Atriarch its vibrant appearance. 


                This water feature is adaptable for both residential and commercial use. The Atriarch was designed to perform flawlessly for many years in a variety of applications. It comes with a 100-foot 12-gauge submersible electric cable. Longer lengths of electric cable are available for purchase. Purchasable light sets as well as later additions are both options.


                Features:

                • There is no upkeep required.
                • Fast Performing. 
                • Powerful Flow. 

                 

                1 HP
                Spray Size 30 ft High x 25 ft Wide
                Recommended Pond Size 0.5 - 1 Acre
                Minimum Water Depth 44 Inches
                Flow Rate 4,500 gal/hr
                Voltage 115V or 230V


                 

                1.5 HP
                Spray Size 40 ft High x 35 ft Wide
                Recommended Pond Size 1 Acre - 2 Acres
                Minimum Water Depth 50 Inches
                Flow Rate 6,900 gal/hr
                Voltage 230V only


                 

                2 HP
                Spray Size 50 ft High x 40 ft Wide
                Recommended Pond Size 1 Acre - 2 Acres
                Minimum Water Depth 56 Inches
                Flow Rate 9,300 gal/hr
                Voltage 230V only


                 

                3 HP
                Spray Size 60 ft High x 50 ft Wide
                Recommended Pond Size 1 Acre and Above
                Minimum Water Depth 60 Inches
                Flow Rate 10,200 gal/hr
                Voltage 230V only

                 

                Required Water Depth 

                 

                Horsepower Min. Pond Depth
                1 HP 36"
                1.5 HP 38"
                2 HP 40"
                3 HP 50"

                 

                Electrical 

                 

                Motor Size Watts Amps
                1 HP 115V 1090 11.5
                1 HP 230V 1210 8.2
                1.5 HP 230V 1770 10.6
                2 HP 230V 2280 12.6
                3 HP 230V 3000 14

                 

                Power Cord Length

                 

                Motor Size Available Cord Lengths
                1 HP 115V 100' - 150'
                1 HP 230V 100' - 400'
                1.5 HP 230V 100' - 400'
                2 HP 230V 100' - 400'
                3 HP 230V 100' - 400'

                LED Lights (Optional)

                 

                • Can be purchased now or added later. Light sets simply screw on to float.
                  • 2-light sets recommended for 1.5 HP and below.
                  • 4-light sets recommended for 2 HP & 3 HP.


                  Warm White LED 14-Color LED
                  Single Color Option 14 Color Options
                  Digital Timer Included Digital Timer Included
                  No Remote Control Remote Control Included
                  110V 110V
                  2 or 4-Light Fixtures 2 or 4-Light Fixtures
                  Power Cable Included Power Cable Included

                   

                   

                  Timers (Optional)

                  • Can be purchased now or added later. 
                  • Timers are only made to control fountains, not lights.
                  • Answer to FAQ: The difference between the residential and commercial 230V timer is the residential box is plastic and the commercial box is metal. Both perform the same function.

                   

                  115V Timer 230V Timer
                  Operates 115V Pumps Operates 230V Pumps
                  40 Amp Rating 40 Amp Rating
                  5" H x 5.5" W x 3.75" D 8.9" H x 6.1" W x 3" D

                  1. Assemble The Unit

                  Assembly of Scott Aerator Fountains takes 15-20 minutes. Assembly instructions will be included with your fountain. Scott Aerator fountain kits come with the following:

                  • Pump with cylindrical casing and power cable attached
                  • Square float platform
                  • Protective stainless steel filter
                  • Decorative nozzle (this does not apply to the DA-20)
                  • 5/16"x2" stainless steel bolts
                  • Stainless steel nuts & washers
                  • Self tapping stainless steel screws

                   

                  Tools Needed: You will need a wrench (or socket driver) and pliers. 

                   

                   

                  Assembly Steps:

                  1. Begin by placing the fountain housing on a solid surface, with the pump discharge opening facing up.
                  2. Tie nylon rope (not included) to the two stainless steel eyebolts. These will be the anchoring lines for the fountain.
                  3. Next, put the float in place and secure with the two 5/16" x 2" bolts, washers and nuts included.
                  4. Now, turn the fountain upside down, remove the styrofoam doughnut, and place the stainless steel filter in place. Be sure to line up the pre-drilled holes on the fountain with the position marks on the filter. Attach the filter with the
                    three self-tapping screws provided.

                   

                  2. Attach Lights (If you did not order lights, skip this step)

                   

                  Scott Aerator fountain light kits simply attach to the square float platform. Scott Aerator light kits come with the following:

                   

                  • (2) or (4) LED light fixtures with power cable
                  • 1/2" bolts & nuts
                  • (2) or (4) stainless steel arm brackets
                  • Timer/control unit
                  • Remote control (only for color-changing lights)

                   

                  Tools Needed: Wrench & Pliers

                   

                  *Please note: The included timer/control unit is required to operate the lights. Do not remove cord from control unit, this will void the lights' warranty.


                  Assembly Steps:

                  1. Attach each arm assembly to the water feature. Be sure to orient the arms with “L” facing upward. Remove one of the 2" bolts attaching the float to your Scott water feature and align the holes with the stainless steel arm. Reinsert the bolt with washer, outward through the housing, float and stainless steel arm. Secure with washer and nut. Repeat for the remaining arm assembies.
                  2. Continue by attaching each light to the slotted end of the stainless steel arms. Feed 1/2" x 1/4" bolt downward through each light bracket and steel arm then secure with 1/4" nut. The lights can be positioned along the arm by loosening the lock nut, sliding the light to the desired position, then re-tightening the nut.
                  3. Connect the lights to the Timer Control Unit by aligning pins and screwing the connector together 1/2 turnonly. Do not force the connection tight or you may damage the O-ring or wiring.

                   

                  3. Place in water

                  • Once the unit is assembled, it is ready to be placed in the water for final preparation and anchoring.
                  • Care should be used when handling the fountain; it is very important that the weight of the fountain not be placed upon the stainless steel filter.
                  • Once the fountain head is in the water, attach the fountain head by screwing it into place (this does not apply to the DA-20).
                  • Float the fountain to the desired position and secure the attached nylong ropes to shore or use 2 concrete blocks submerged at least 20 feet apart.
                  • The final step is to plug your fountain and lights into your established power source. Always use a ground fault circuit interrupter (GFCI) and a licensed electrical contractor to install your power source.

                   

                  Choosing the Right Horsepower

                  • The size and flow rate of your fountain's spray is influenced by the horsepower you choose. A higher horsepower will move more water, resulting in a larger and/or thicker spray. 
                  • When it comes to selecting horsepower, it largely depends on your budget and pond size. It is recommended to keep a minimum distance of 10 feet between the fountain spray and the edge of your pond. 

                  Choosing the Right Voltage

                  • If you are unsure about which voltage to choose, feel free to contact us for assistance. 
                  • If you plan to run 115V power to the edge of your pond, please note the maximum distances from the pump to the breaker, including the power cord you order. 
                  • If you plan to run 230V to the edge of your pond, you generally will not have to worry about the distance. 

                   

                  Motor Size Max distance from pump to breaker on 115V
                  1/3 HP 115V 280'
                  1/2 HP 115V 250'
                  3/4 HP 115V 200'
                  1 HP 115V 150'

                   

                   

                  Choosing the Right LED Lights (Optional)

                  • LED lights can be purchased now or added later. They simply screw on to the fountain. 
                  • Lights run on 110V and come with their own power cord.
                  • Single-color warm white LED lights or color-changing LED lights are available. 

                  • Both options come with a programable timer. 
                  • Color-changing lights come with a remote control that works up to 1,000 feet away.
                  • For 1 HP and below 2-light sets are recommended.
                  • For 1.5 HP and 2 HP 3-light sets are recommended.
                  • For 3 HP 4-light sets are recommended. 

                   

                  Choosing the Right Timers (Optional)

                  • Timers can be purchased now or added later. 
                  • Timers are only made to control fountains, not lights.
                  • Residential and Commercial Timers perform the same function. 

                  • Residential timer box is plastic and the commercial box is metal. 

                   

                   

                  Unique Additional Nozzles (Optional)

                  • Important Note:  Scott Aerator Fountain pumps can accommodate all Scott Aerator Nozzles. If you would like a different spray pattern, you can easily purchase a new nozzle.  
                  • There are 9 unique nozzle options that you can choose from. Each has its own special spray pattern!  
                  • TIP: Not all nozzles will fit every motor size. Please double-check to make sure your nozzle will fit the appropriate motor horsepower. 

                   

                  Nozzle Spray Sizes (H x W)

                   

                  Nozzle 1/2 HP 1 HP 1.5 HP 2 HP 3 HP
                  Amherst N/A 35' x 40' 35' x 40' N/A 30' x 25'
                  Atriarch N/A 30' x 25' 40' x 30' 50' x 40' 60' x 50'
                  Baystone N/A 14' x 30' 20' x 40' N/A N/A
                  Cambridge N/A 30' x 40' 35' x 45' N/A 40' x 55'
                  Clover 20' x 35' 30' x 42' 40' x 50' N/A 50' x 70'
                  Millbrook N/A 15' x 30' 17' x 35' N/A N/A
                  Rosewood N/A 30' x 40' 35' x 45' N/A N/A
                  Skyward 20' x 35' 30' x 42' 40' x 50' N/A 50' x 70'
                  Tudor N/A 10' x 35' 15' x 45' N/A N/A
                  • FREE Shipping via FEDEX, LTL Ground, & UPS. Ships in 2-3 Business Days. 

                   

                  • Ships Only to Lower 48 States of the United States

                   

                   

                   

                    Fountains

                    Q: What is the best way to choose a fountain?

                    A: This is the question we receive most frequently, and it carries a lot of weight. We would start by asking: is aeration the goal, or is it aesthetics? Or, do you need both? Consider one of our Aerating Fountains if you're looking for aeration, or both. Compared to aesthetic fountains, they circulate much more water at a much higher rate. In terms of aesthetics, there is a wide variety of options to consider. What it looks like is ultimately up to you. To begin with, make sure your pond meets the minimum depth requirements. Then, make sure your display doesn't exceed the capacity of your pond. Each fountain product page contains display dimensions.

                    Note: Water can only be aerated up to about 6 feet deep using fountains and surface aerators.

                     

                    Q: What is the right horsepower choice for a fountain?

                    A: The horsepower refers to a motor's size, which determines how large the spray pattern will be. In addition, make sure that your pond is deep enough and that the spray won't spill onto the sides regardless of the horsepower you choose. Our fountains work best with ponds that are a quarter acre or larger in size (depending on their shape). In order to choose the horsepower you need, you need to consider your budget and the size that you'd like.

                    Q: Should I hire someone for my fountain installation?

                    A: A licensed electrician should install a power source if you do not already have one installed by the pond. Our fountains are fairly easy to install once the power source is up and running. With nylon rope and cinder blocks anchored on two sides, and powered by a submersible cord that plugs into a power source at the edge of the pond, our fountains float in the middle of the water. We often have customers who install their own fountains in order to save money. You will need to take into account your available resources.

                    Q: Which is better for me: 110-120V or 210-240V?

                    A: 210 to 240 volts is generally ideal if the power source is more than 70 feet away from the main breaker. Naturally, your power source needs to be able to handle the higher voltage. In this manner, you can ensure that your fountain receives sufficient power to run continuously. Choosing the lower voltage will result in your fountain running intermittently or turn off immediately after being turned on or it will not operate at its full potential if your pond is too far from the main breaker. If you have any questions, please do not hesitate to contact us.

                    Q: Does the price include lights?

                    A: No, lights are not included by default. It is possible to order them simultaneously with your fountain or sometime later. Attaching them to the floating unit is as simple as snapping them on. It is well worth the investment.

                    Q: What determines the price of the power cord?

                    A: Material costs are largely responsible for this. Different kinds of power cords are available for fountains, ranging from 14-gauge copper or stainless steel wire to 4-gauge copper or stainless steel wire (dependent on fountain size and cord length).

                    Q: Is it okay to leave my fountain in water over the winter?

                    A: Scott Aerator Fountains are the only fountains that remain operational throughout the winter. In the winter, either run them continuously or turn them off completely. Once the ice thaws, they can be turned back on.

                     

                    Aerators

                    Q: Can aeration maintain the health of my fish and clean my pond?

                    A: Without a doubt. Whenever a pond needs to be cleared, the first step is aeration.

                    Q: What is the best way to choose an aerator?

                    A: Your pond's size and depth will determine this. There are various categories on the website based on the size of the pond (in acres). Our Surface Aerators and Aerating Fountains are ideal for ponds under six feet deep. Sub-Surface aerators are recommended for ponds over 6 feet deep.

                    Q: How do I get my aerator installed?

                    A: A licensed electrician should be consulted if a power source has not yet been installed by the pond. We have designed our aerators so that they easily install once the power source is ready. We have found that most of our customers install the equipment themselves without any problems and save money by doing so. You will need to take into consideration your resources.

                     

                    Q: How should the aeration setup be configured?

                    A: An ideal aeration setup would include a surface aerator or aerating fountain, as well as a Sub-Surface aerator. A surface aerator or fountain would circulate oxygen released from the pond's bottom thoroughly.

                    Recommended for you

                    Free Shipping

                    Track Your Order All The Way To You.

                    Quality Support

                    USA Based Customer Service Team.

                    Secure Checkout

                    Encrypted SSL security. Your details are protected.